Sunset Location:

9035 Sunset Drive, # 203

Miami, FL 33173

Palmetto Bay Location:

9765 SW 184 Street

Miami, FL 33157   

Phone: (305) 308-0210 

Fax: (305) 273-2176 

 

 

Materials needed to assemble the mask are listed below. The adapter was designed to fit with the equipment listed below. Equivalent pieces may be made by other manufacturers however, no equivalent pieces were used to design the adapter. Adapter will fit any size of the two masks listed below. DISCLOSURE: Dr. Miki has NO financial interest in the products listed below. 

There are two types of Masks below. The first mask uses readily available equipment and the adapter uses parts that can be bought at your local hardware store. The second mask uses readily available equipment and the adapter must be 3D printed. 

MASK WITH ADAPTER MADE FROM PARTS FROM LOCAL HARDWARE STORE

Mask

This link below is to the mask distributed by A ANIM DIVE. 

ANIMDIVE Full Face Snorkel Mask with Latest Advanced Safety Breathing System, Dry Top System, 180 Panoramic Snorkeling Mask with Camera Mount, Anti-Leak &Anti Fog

https://www.amazon.com/dp/B0833LVYPM/ref=cm_sw_em_r_mt_dp_U_7vpFEbSS6Y9VE

This link below is to the mask distributed by Weird Tails. 

weird tails Upgraded Full Face Snorkel Mask, Foldable Snorkeling Mask for Adults and Kids with Camera Mount 180 Large Panoramic View Easy Breath Dry Top Set Anti-Fog Anti-Leak

https://www.amazon.com/dp/B07V7ZFH8Z/ref=cm_sw_em_r_mt_dp_U_dvpFEbKBPW4E5

This link below is to the mask distributed by CRESSI.

CRESSI Adult Snorkeling Full Face Mask l Wide Clear View, Anti-Fog System l Duke Dry: designed in Italy: Quality Since 1946

https://www.amazon.com/gp/product/B07JMVRCT9/ref=ox_sc_act_title_1?smid=A328RN51KE2XLP&th=1&psc=1

Adapter

FERNCO FITTINGS NEEDED to make mask. Parts needed for each mask listed below. These are available at local hardware stores (e.g. HomeDepot, Lowes)

Animdive: PDWC-100, P1056-075

Weird Tails: PDWC-100, P1056-075, P1056-100

CRESSI: PDWC-100, P1056-075, P1056-100

N99 (Bacterial and Viral Filtration Efficiency 99.9+%) Universal fit. Bacterial/Viral Filter for CPAP. Universal connector: Male connector end 15mm and Female connector end 22mm. Can be found on Amazon and other retailers online.
Instructional Video

Video of step-by-step instructions for making the adapter from hardware parts

Video for Different types of masks you can make yourself from parts from local hardware store here

 

 

MASK WITH ADAPTER YOU CAN 3D PRINT

Mask

This link below is to the mask distributed by A ANIM DIVE. Works with Design 1.

ANIMDIVE Full Face Snorkel Mask with Latest Advanced Safety Breathing System, Dry Top System, 180 Panoramic Snorkeling Mask with Camera Mount, Anti-Leak &Anti Fog

https://www.amazon.com/dp/B0833LVYPM/ref=cm_sw_em_r_mt_dp_U_7vpFEbSS6Y9VE

This link below is to another mask distributed by DIVELUX. Works with Design 2.

DIVELUX Full Face Snorkel Mask- Anti Fog & Anti Leak TechnologyI Seaview 180 Degree Panoramic Snorkel for Adult and Youth with Gifts: Waterproof Case and Ebook

https://www.amazon.com/gp/product/B07L7DPMH7/ref=ppx_yo_dt_b_asin_title_o03_s00?ie+UTF8&psc=1

This link below is to the mask distributed by Weird Tails. Works with Design 3.

weird tails Upgraded Full Face Snorkel Mask, Foldable Snorkeling Mask for Adults and Kids with Camera Mount 180 Large Panoramic View Easy Breath Dry Top Set Anti-Fog Anti-Leak

https://www.amazon.com/dp/B07V7ZFH8Z/ref=cm_sw_em_r_mt_dp_U_dvpFEbKBPW4E5

Adapter

Use Design 1 plans for use with snorkel mask listed by A ANIM DIVE on Amazon. See below.

Use Design 2 plans for use with snorkel mask listed by DiveLux on Amazon. See below.

Use Design 3 plans for use with snorkel mask listed by Weird Tails on Amazon. See below.

N99 (Bacterial and Viral Filtration Efficiency 99.9+%)

Universal fit. Bacterial/Viral Filter for CPAP. Universal connector: Male connector end 15mm and Female connector end 22mm. Can be found on Amazon and other retailers online.

3D Design Plans for Adapter

3D Design plans for all adapters

Note: We have uploaded all the files to the link above. Some files are posted. It takes 24 hours for them to be posted. You can email us here for the plans as well. 

Make sure to use the correct 3D plan for the type of mask you order. There are companies that will print these for you if you give them the design.

Design 1 'PLA Version' is for the mask distributed by A ANIM DIVE on Amazon.

Design 2 'Dual Chamber' is for the mask distributed by DiveLux on Amazon.

Design 3:'Weird Tails Adaptor Version 3' is for the mask distributed by Weird Tails on Amazon

Instructional video

Video for Design 1 (ANIMDIVE) here

Video for Design 2 and Design 3 (for Weird Tales and DiveLux) here

 

If you have any questions, please contact us